Managing Electrical Injuries LV Rescue: What to Do After a Live LV Panel Panel Rescue in Brisbane
A live LV panel doesn’t give you a heads up. One second your mate’s working the board, next second he’s on the ground and everyone standing around him is looking at each other, not sure what to do next. This guide isn’t about how to isolate the power or pull someone clear of a live […]
What Happens in a Low Voltage Rescue Course
You’re standing at the site gate, ticket in hand, and the inductor tells you your LVR has lapsed. No ticket, no access. That’s it, you’re not getting on-tools today, and depending on the job, maybe not tomorrow either. If that’s roughly where you’re at right now, or you’re trying to get ahead of it before […]
What Is the Point of Isolation? Electrical Safety Basics Explained
You’ve heard it a hundred times on site. “Confirm your point of isolation before you touch that board.” Someone says it at toolbox talk, it’s written on the permit, your supervisor barks it before you crack a panel open. But has anyone actually sat down and explained what it means? Properly, not just the two-second […]
What Skills Do You Learn in an LVR Course?
Booked into an LVR course and got no real idea what you’re walking into for the next few hours? You’re not on your own there. Most blokes turn up knowing it’s the ticket they need to get back on-site, and not much past that. That’s on the providers, if we’re honest. Plenty of pages will […]
PPE for Low Voltage Rescue: The Compliance Spec Electricians Need
You did the course. You’ve got UETDRRF018 sitting in your wallet, current, no dramas. Then you turn up to site and the inductor pulls your glove bag out of your kit and has a look. Wrong class rating. Or right class, but the retest tag lapsed three months back. It doesn’t matter that you passed […]
One Man Drag Method Training: What You Need to Know
If you’ve been told your live low voltage rescue ticket needs the one man drag method training before you’re back on site, you’re not the only sparkie scrambling to figure out what that actually means. Under the Electrical Safety Act 2002 (Qld), anyone working around live low voltage panels has to be trained to get […]
Affordable LVR Training Brisbane: What’s Actually Included
You got turned away at site induction because your LVR ticket expired. Or maybe you never had one, and now the head contractor’s telling you no ticket, no access, no work today. Either way, you’re standing at the gate with your tools in the ute and nowhere to be. That’s the spot most guys are […]
RTO Low Voltage Rescue Course in Brisbane
You’re standing at the gate. Your ticket’s expired, or you never had it in the first place, and the site supervisor just told you straight: no LVR, no access, no work today. That’s a full day’s pay gone, and if it’s a bigger job, it might be the reason a head contractor stops calling you […]
Low Voltage Rescue for Apprentices: What You Need to Know
So your employer or the site supervisor has just told you that you need a Low Voltage Rescue ticket. And if your first thought was “wait, do I actually need that already?” you’re not alone. This catches a lot of apprentices off guard, and it’s not because anyone’s done anything wrong. It’s just one of […]
Low Voltage Rescue Statement of Attainment: What It Proves and Whether Your Site Will Accept It
You turn up to site induction, hand over your paperwork, and get knocked back anyway. Maybe the format’s wrong, maybe the head contractor’s system doesn’t recognise it, or maybe you’re not even sure the ticket in your hand is the right one for this job. It happens more than people admit. A low voltage rescue […]
